- Product Details
- Product Specification
- Review
Sleek, Compact, Powerful, and Really Cool
The PA D4000.4 amplifier is capable of bridging two full-range channels into a single full range channel with higher output power. For instance, one front and one rear channel will increase the output power from 125W per channel to 400W per channel (for a 4 ohm load). The most common hookups for the PA D4000.4 would be four full-range channels, two full-range channels and a bridged sub, or two bridged subwoofers.
PA D4000.4 Features:
Super-Eefficient Class D Design Runs much cooler than conventional amps.
Toroidal Transformers Help keep the amplifier’s sleek design under 2" tall while ensuring plenty of clean, efficient power
Protection Thermal, DC offset, reverse DC voltage and short circuit protection
Nickel-plated wire terminals & RCA connectors Ensure maximum signal transfer
Front & rear level controls Adjust the gain of the front and rear channels to match the output voltage from your head unit.
Low-pass & high-pass frequency controls Enables you to adjust crossover overlap for better blending of speakers.
Front & rear BPF, FULL, HPF switches Selects full range, high pass filter, or bandpass filter to dial in your speaker blending.
Channel mode switch (ST/4Ch) In the stereo position, the amplifier will send the same signal to front and rear channels.
Stainless steel hardware Used throughout, it won’t corrode in humid environments
|
Number of Channels |
1 |
|
Class |
D |
|
Peak Power Rating (Watts) |
|
|
RMS Power Rating (Watts x Channels) - 4 Ohms |
500 x 1 |
|
RMS Power Rating (Watts x Channels) - 2 Ohms |
800 x 1 |
| RMS Power Rating (Watts x Channels) - 1 Ohm |
1200 x 1 |
| RMS Power Rating - Bridged | N/A |
| Minimum Impedance Unbridged (Ohms) |
1 |
| Minimum Impedance Bridged (Ohms) |
N/A |
| THD at Rated RMS Power |
0.1% |
| Bulit-in Crossover - Low Pass |
Yes |
| Built-in Crossover - High Pass |
N/A |
| High Pass Crossover Frequency (Hz) |
N/A |
| Low Pass Crossover Frequency (Hz) |
50-200hz |
| Signal-to-Noise Ratio |
105dB |
| Bass Boost |
0-12dB |
| Bass Remote Included |
Yes |
| Fuse Rating | 120A |
| CEA-2006 Compliant | Yes |
| Maximum Power Wire Gauge Size | 4 Gauge |
| Warranty | 1 Year |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.